Leading 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Leading 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Blog Article
Don't underestimate the forklift at the office. If the procedure is bad, there will certainly be serious accidents in minutes, and there are numerous mishaps including forklifts.
Instance 1: The forklift freight obstructed the vehicle driver's view, and the individual in front could not be found, resulting in a moving crash.
Instance 2: In order to maintain the equilibrium of the forklift when lifting hefty items, the staff members utilized their body weight as the counterweight, which practically caused casualties.
Situation 3: The width of the forklift cargo surpasses the permitted width of the course and hangs on the roadside shelf, which practically triggers an mishap.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the personnel illegally, the forklift motorist does not use the seat belt, the forklift lifter falls and the driver is squashed when the forklift surrender.
Case 7: The forklift chauffeur did not wear a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift procedure should take note of these matters ：.
Beginning.
1. Before beginning, observe the surroundings, and after confirming that there are no barriers that prevent the security of driving, beep the horn first and afterwards start.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) gauge need to be secure before beginning.
3. When the forklift begins with a load, the vehicle driver should first confirm that the tons is secure and reliable.
4. The begin has to be slow and stable.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole needs to be slanted backward. .
2. Do not lift the fork too high when driving. When entering and leaving the job site or while driving, beware that there will be no challenges overhead. When the lots is taking a trip, the fork should not be raised expensive, which will impact the security of the forklift. .
3. After discharging, the fork must be reduced to the regular driving position before driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal must be issued first. High-speed doglegs are banned. High-speed sharp turns will trigger the lorry to shed side security and topple. .
5. When the forklift is downhill, it is strictly forbidden to shut off the flame and slide, and it is prohibited to brake all of a sudden while driving with loads unless there are unique conditions.
6. When the forklift is running, it should follow the website traffic rules in the factory and should keep a specific safety and security range from the lorry ahead. .
7. When the forklift is running, the tons should remain in the most affordable placement that does not impede the driving, and the gantry needs to be correctly tilted back. The tons shall not be increased except when stacking or packing. .
8. The height of the tons should not block the chauffeur's sight. In special conditions, when the thing impacts the forward vision, drive at a reduced rate when reversing.
9. It is prohibited to switch on the ramp, neither to drive throughout the ramp. .
10. The secure driving speed of the forklift in the manufacturing facility location is 5 km/h, and it must drive safely at a low speed when going into the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is forbidden for workers to stand on the fork to hold items and play a balancing function. .
12. If problems are found, they will be fixed and reported in a prompt manner, and they will certainly never operate with illnesses or hide them.
filling and discharging.
1. When fork-loading products, the range between both forks need to be readjusted as needed to make the load of both forks balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is prohibited to deal with a single fork or make use of a fork top or pull. In unique conditions, security indication need to be established to remind bordering pedestrians. .
3. In the process of loading and unloading things, the forklift has to be braked with the brake. .
4. The rate of the lorry must be slow and constant. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled things and harm people. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it must be kept in mind that the fork tip should not touch other products or objects. The lots should be maintained with minimal back tilt of the gantry to make sure that the lots does not glide backwards. The mast can be tilted onward slightly when the load is lowered to enable very easy positioning of the tons and extraction of the forks. .
6. It is prohibited to fork goods at broadband and ram difficult items with the fork head. .
7. When the forklift is working, it is forbidden for individuals to loaf the fork, so regarding prevent the collapse of the goods and hurt people. .
8. Overwhelming is prohibited, and it is banned to utilize forks to lift workers to take part in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not enabled to utilize the brake inertia to slip, place, round or roll things. .
10. It is not permitted to make use of forks to select, transform pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should discharge the goods or lower the fork framework.
2. Pull the emergency brake manage to dead or dispirit the emergency brake button.
3. The engine is shut off and the power is cut off. (Except for special situations, such as the driver does not leave the vehicle's view and does not go beyond 1 min).
4. Get rid of the secret. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance should be checked, and gas, lubing oil and air conditioning water must be added.
2. Check the safety efficiency of beginning, running and braking.
3. Check whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the external leakage needs to likewise be inspected and the seals ought to be replaced in time.
Forklift Safety Operation Specifications.
1. You have to inspect before leaving the vehicle;.
2. When you encounter a person in front of you during driving, you need to send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be as well sharp to prevent the propensity of " totally free turning";.
6. Adding and down the slope must be slow and consistent, and no switching on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across big or heavy items and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork operation is not permitted.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing Electric Forklift Truck for Warehouse on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the Stand-on Electric Pallet Stacker fork is raised.
8. Do not drive laterally on inclines
.
Car parking is not permitted under the list below problems.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the area with the same length as the challenge ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844